[Basic Guide] 10 Easy steps to set the singularity engine.
Oct 7, 2013 17:41:08 GMT
Post by Mvzo on Oct 7, 2013 17:41:08 GMT
Alright, since you guys are learning on how to set the singulo read this tutorial, it would be fast and easy.
(I do this because most players are clueless with the wiki and nobody sets it all the time)
Step 1 - Make sure you go to the PA engine room and set up the engine with 3 basic way of doing it.. 1st (Wrench it all with the wrench securing it) 2nd (Wire it all) 3rd (Screw driver it all) and tada you have yourself a basic engine set up and ready to go.
Step 2 - Once the engine is set up along with the computer, click on the computer and run a scan for all the parts to be in place if you don't do this successfully this mean that you did something wrong earlier.
Step 3 - Once the computer is done, if your the CE open the secure engineering vault by using the button inside the CE's office and if your just a regular engineer hack in and open the vault yourself if there's no CE around.
Step 4 - Eject at least 5 or 6 plasma tanks from the oxygen/plasma tank storage and fill it to full capacity by loading it up into the plasma canister inside the secure storage that you opened before.
Step 5 - Load up the tank into the radiation collector array and turn them all on with the plasma tank loaded in.
Step 6 - Just go and get a hardsuit set and an oxygen tank and go outside to turn on all the emitters (note when you turn them on use your engineering id to lock them so the AI or anybody in a space suit couldn't touch them at all).
Step 7 - Once every emitters is set turn on all the field generators and make sure everything single each of them connects to each other.
Step 8 - Go back inside and turn to the PA engine by turning the particles accelerator to 2 and observe the singularity growth.
Step 9 - Once the singularity grow to level 3 "Red stage (medium-small) turn the particle accelerator to 0 to avoid the release of the sing.
Step 10 - Once the engine is up, go to each and every SMES to make sure they are charging and set the input to 20k input and 15k output (if only you refilled the plasma) if you don't the regular input is 20k input and 10k output.
You are now an official station engineer.
(I do this because most players are clueless with the wiki and nobody sets it all the time)
Step 1 - Make sure you go to the PA engine room and set up the engine with 3 basic way of doing it.. 1st (Wrench it all with the wrench securing it) 2nd (Wire it all) 3rd (Screw driver it all) and tada you have yourself a basic engine set up and ready to go.
Step 2 - Once the engine is set up along with the computer, click on the computer and run a scan for all the parts to be in place if you don't do this successfully this mean that you did something wrong earlier.
Step 3 - Once the computer is done, if your the CE open the secure engineering vault by using the button inside the CE's office and if your just a regular engineer hack in and open the vault yourself if there's no CE around.
Step 4 - Eject at least 5 or 6 plasma tanks from the oxygen/plasma tank storage and fill it to full capacity by loading it up into the plasma canister inside the secure storage that you opened before.
Step 5 - Load up the tank into the radiation collector array and turn them all on with the plasma tank loaded in.
Step 6 - Just go and get a hardsuit set and an oxygen tank and go outside to turn on all the emitters (note when you turn them on use your engineering id to lock them so the AI or anybody in a space suit couldn't touch them at all).
Step 7 - Once every emitters is set turn on all the field generators and make sure everything single each of them connects to each other.
Step 8 - Go back inside and turn to the PA engine by turning the particles accelerator to 2 and observe the singularity growth.
Step 9 - Once the singularity grow to level 3 "Red stage (medium-small) turn the particle accelerator to 0 to avoid the release of the sing.
Step 10 - Once the engine is up, go to each and every SMES to make sure they are charging and set the input to 20k input and 15k output (if only you refilled the plasma) if you don't the regular input is 20k input and 10k output.
You are now an official station engineer.